Nuova linea 2013 Specialized Enduro con i modelli S-Works Carbon, Expert Carbon, Comp e Evo, bici MTB da 26″ Full-suspended per chi ama l’All Mountain spinto, la discesa ed i terreni impegnativi.
I modelli S-Works Enduro Carbon e Enduro Expert Carbon sono bici con montaggi di altissima qualità, con il classico e originale telaio a doppio triangolo in fibra di carbonio FACT IS-X 11m ed il carro FSR in lega M5, 165mm di escursione alla ruota posteriore e battuta mozzo 142, montano forcella Fox 34 Talas CTD Factory Series (S-Works) e Performance (Expert), con la corsa regolabile da 160-130mm, asse passante 15 mm, rivestimento Kashima (S-Works) e regolazioni specifiche per salita e discesa per entrambe.
L’ammortizzatore posteriore è un Cane Creek Double Barrel ad aria con regolazione delle velocità di compressione e ritorno basse e alte (S-Works) mentre un Fox Float CTD Performance con autosag e 3 regolazioni per la compressione: Salita, Trail e discesa (Expert).
La trasmissione è quasi tutta SRAM XX One a 11 velocità, guarnitura X0 in fibra di carbonio, perno PF30 a singolo ingranaggio per la (S-Works) e mista SRAM Xo/x9/x7 con guarnitura doppia SRAM Carbon, perno GXP e tendicatena Gamut per la (Expert).
Freni Avid X0 Trail World Cup da 200/180 mm (S-Works) e Avid Elixir 7 SL da 200/180 mm (Expert) e cerchi Roval Traverse.
Entrambi i modelli di punta sono dotati del reggisella telescopico Specialized BlackLite con regolazione a tre posizioni e con il comando remoto.
Gli altri due modelli Enduro Comp e Enduro Evo sono due bici diciamo più entry level rispetto alle precedenti, hanno un telaio in alluminio in lega M5 con escursione 165mm (Comp) e 180 mm (Evo) e battuta del carro 142 mm per entrambe, forcella Fox 34 Float CTD Evolution da 160mm, asse passante da 15 mm, regolazioni specifiche per salita e discesa (Comp) e forcella X-Fusion Vengeance da 170 mm, tubo sterzo conico in lega, asse passante 20mm e regolazione del ritorno (Evo).
Ammortizzatore posteriore Fox Float CTD Evolution con taratura dedicata Autosag e 3 regolazioni della compressione: Salita, Trail e Discesa per la (Comp) e ammortizzatore dedicato Fox Van R a molla con regolazione del ritorno.
La trasmissione è mista SRAM X9/x7… con guarnitura doppia SRAM per entrambe, i freni idraulici Avid Elixir 5 R SL da 200/180 mm (Comp) e Avid Elixir 3 da 200/180 mm (Evo) e cerchi Roval.
Specialized S-Works Enduro Carbon
Prezzo di listino 7790 €
Specifiche Tecniche:
| Telaio | FACT IS-X 11m carbon front triangle, M5 rear triangle, tapered HT, PF30 BB, ISCG 05 mounts, 142+ dropouts, full cartridge bearing pivots, replaceable derailleur hanger, 165mm travel |
| Forcella | FOX 34 TALAS CTD Factory 26, Kashima coating, air spring, tapered alloy steerer, Climb, Trail, Descend settings w/Trail and reb adj., 15mm thru-axle, 160/130mm |
| Ammo. Post | Custom Cane Creek Double Barrel Air, high/low speed, comp and reb adj., 216x64mm |
| Sterzo | 1-1/8 and 1-1/2″ threadless, Campy style upper with 1.5″ lower, cartridge bearings |
| Attacco manubrio | Syntace F109, 6-degree rise, 31.8mm clamp |
| Manubrio | Specialized All-Mountain low-rise bar, uni-directional carbon, 720mm wide, 8-degree backsweep, 6-degree upsweep, 31.8mm |
| Manopole | Specialized Sip Grip, half-waffle aramid-infused, S/M: Regular, Others: XL thickness |
| Freni | Custom Avid X0 Trail World Cup, alloy backed semi-metal pad, 4-piston caliper, 200/180mm rotor |
| Leve Freni | Custom Avid X0, carbon lever, tool-less reach adj. |
| Cambio posteriore | SRAM XX One, 11-speed |
| Deragliatore Ant. | N/A |
| Comandi | SRAM XX One, 11-speed, carbon/aluminum trigger, w/MatchMaker clamp |
| Cassetta | SRAM XX One, 11-speed, 10-42 |
| Catena | SRAM XX One, 11-speed, hollow plates/pins, nickel finish |
| Guarnitura | SRAM XX-One, carbon arms, single 34T ring, PF30 spindle w/E13 Guide, S: 170mm, Others: 175mm |
| Ingranaggi | 34T, 32T ring included |
| Movimento Centrale | SRAM PF30, OS press-in bearing, sealed cartridge |
| Pedali | Resin Test Ride Pedals with toe clips, CEN std. |
| Cerchi | Roval Traverse SL, carbon disc, 29mm, 27/32h |
| Mozzo Anteriore | Roval Traverse SL, 15mm thru-axle end caps, 27h |
| Mozzo Posteriore | Roval Traverse SL 142+, DT Swiss Star Ratchet, 12mm thru-axle, 32h |
| Raggi | DT Swiss Super Comp, 2.0/1.65/1.8 stainless |
| Pneumatico Ant. | Specialized Butcher Control, 2Bliss Ready, 60 TPI, aramid bead, 26×2.3″ |
| Pneumatico Post. | Specialized Purgatory Control, 2Bliss Ready, 60 TPI, aramid bead, dual-compound, 26×2.3″ |
| Camere | Ultralight presta |
| Sella | Body Geometry Henge Expert, Ti rails, 143mm |
| Reggisella | Specialized Command Post BlackLite, 3 position, adjustable height w/air spring, remote operated, single bolt head 30.9mm, S:100mm travel, Others: 125mm travel |
| Collarino | Command Post 34.9mm clamp, 7050 hard anodized alloy collar, single bolt w/cable guide |
| Colore | Nero/rosso |
| Misure | S, M, L |
Specialized Enduro Expert Carbon
Prezzo di listino 5250 €
Specifiche Tecniche:
| Telaio | FACT IS-X 11m carbon front triangle, M5 rear triangle, tapered HT, PF30 BB, ISCG 05 mounts, 142+ dropouts, full cartridge bearing pivots, replaceable derailleur hanger, 165mm travel |
| Forcella | FOX TALAS CTD Performance 26, air spring, tapered steerer, Climb, Trail, Descend settings w/Trail and reb adj., 15mm thru-axle, 160/130mm |
| Ammo. Post | Custom FOX Float CTD Performance with AUTOSAG, Climb, Trail, Descend settings w/ Trail and rebound adj., 216x64mm |
| Sterzo | 1-1/8 and 1-1/2″ threadless, Campy style upper with 1-1/2″ lower, cartridge bearings |
| Attacco manubrio | Specialized XC Trail, 6061 alloy, 4-bolt, 6-degree rise, 31.8mm |
| Manubrio | Specialized All-Mountain low-rise bar, 7050 alloy, 720mm wide, 8-degree backsweep, 6-degree upsweep, 31.8mm |
| Manopole | Specialized Sip Grip, half-waffle aramid-infused, S/M: Regular, Others: XL thickness |
| Freni | Custom Avid Elixir 7 SL, alloy-backed semi-metallic pads, HS-1 rotor, 200/180 mm |
| Leve Freni | Custom Avid Elixir 7 SL, hydraulic disc, tool-less reach adj. |
| Cambio posteriore | SRAM X0 Type 2, 10-speed, mid cage |
| Deragliatore Ant. | SRAM X7, 10-speed, S3 direct mount for DMD, bottom pull |
| Comandi | SRAM X9, 10-speed, trigger, w/MatchMaker clamp |
| Cassetta | SRAM PG-1050, 10-speed, 11-36 |
| Catena | KMC X10, nickel plate, reusable Missing Link |
| Guarnitura | Custom SRAM carbon S-2200, 10-speed AM double, PF30 spindle, removable spider, Gamut bash guard, S: 170mm, Others: 175mm |
| Ingranaggi | 36/24 |
| Movimento Centrale | SRAM PF30, OS press-in bearing, sealed cartridge |
| Pedali | Resin Test Ride Pedals with toe clips, CEN std. |
| Cerchi | Roval Traverse, alloy disc, 28mm wide, 27/32h |
| Mozzo Anteriore | Roval Traverse, 15mm thru-axle end caps, 27h |
| Mozzo Posteriore | Roval Traverse 142+, 12mm thru-axle, 32h |
| Raggi | DT Swiss Super Comp, 2.0/1.65/1.8 stainless |
| Pneumatico Ant. | Specialized Butcher Control, 2Bliss Ready, 60 TPI, aramid bead, 26×2.3″ |
| Pneumatico Post. | Specialized Purgatory Control, 2Bliss Ready, 60 TPI, aramid bead, dual-compound, 26×2.3″ |
| Camere | Ultralight presta |
| Sella | Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm |
| Reggisella | Specialized Command Post BlackLite, 3 position, adjustable height w/air spring, remote operated, single bolt head 30.9mm, S:100mm travel, Others: 125mm travel |
| Collarino | Command Post 34.9mm clamp, 7050 hard anodized alloy collar, single bolt w/cable guide |
| Colore | Nero/Verde |
| Misure | S, M, L |
Specialized Enduro Comp
Prezzo di listino 3050 €
Specifiche Tecniche:
| Telaio | M5 aluminum, fully manipulated frame w/ ORE TT/ DT, tapered HT, PF30 BB, ISCG 05 mount, 142mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 165mm travel |
| Forcella | FOX 34 Float CTD Evolution 26, air spring, tapered alloy steerer, Climb, Trail, Descend settings reb adj., 15mm thru-axle, 160mm |
| Ammo. Post | Custom FOX Float CTD Evolution with AUTOSAG, Climb, Trail, Descend settings and rebound adj., 216x64mm |
| Sterzo | 1-1/8 and 1-1/2″ threadless, Campy style upper with 1-1/2″ lower, cartridge bearings |
| Attacco manubrio | Specialized XC Trail, 6061 alloy, 4-bolt, 6-degree rise, 31.8mm |
| Manubrio | Specialized All-Mountain low-rise bar, 7050 alloy, 720mm wide, 8-degree backsweep, 6-degree upsweep, 31.8mm |
| Manopole | Specialized Sip Grip, half-waffle aramid-infused, S/M: Regular, Others: XL thickness |
| Freni | Custom Avid Elixir 5 SL, hydraulic disc, alloy backed organic pads, HS-1 rotor, 200/180 mm |
| Leve Freni | Custom Avid Elixir 5 R SL, hydraulic disc, tool-less reach adj. |
| Cambio posteriore | SRAM X9 Type 2, 10-speed, mid cage |
| Deragliatore Ant. | SRAM X7, 10-speed, S3 direct mount for DMD, bottom pull |
| Comandi | SRAM X7, 10-speed, trigger, w/MatchMaker clamp |
| Cassetta | SRAM PG-1030, 10-speed, 11-36 |
| Catena | KMC X10, nickel plate, reusable Missing Link |
| Guarnitura | Custom SRAM S-1250, 10-speed AM double, PF30 spindle w/ shift guard, S: 170mm, Others: 175mm |
| Ingranaggi | 36/24 |
| Movimento Centrale | SRAM PF30, OS press-in bearing, sealed cartridge |
| Pedali | Resin Test Ride Pedals with toe clips, CEN std. |
| Cerchi | Roval 26, alloy disc, 28mm wide, 32h |
| Mozzo Anteriore | Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 15mm thru-axle, 32h |
| Mozzo Posteriore | Specialized Hi Lo disc, 4x-sealed cartridge bearing, 12mm thru-axle, 32h |
| Raggi | DT Industry, stainless, 14g |
| Pneumatico Ant. | Specialized Butcher Control, 2Bliss Ready, 60 TPI, aramid bead, 26×2.3″ |
| Pneumatico Post. | Specialized Purgatory Control, 2Bliss Ready, 60 TPI, aramid bead, dual-compound, 26×2.3″ |
| Camere | Ultralight presta |
| Sella | Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm |
| Reggisella | Specialized 2014 butted alloy, single bolt setback, 30.9mm, S/M: 350mm, Others: 400mm |
| Collarino | 34.9mm clamp, 7050 hard anodized alloy collar w/ QR, black |
| Colore | Bianco/Nero |
| Misure | S, M, L |
Specialized Enduro Evo
Prezzo di listino 2590 €
Specifiche Tecniche:
| Telaio | M5 aluminum, EVO geometry, fully manipulated frame w/ ORE TT/ DT, tapered HT, PF30 BB, ISCG 05 mount, 142mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 180mm travel |
| Forcella | X-Fusion Vengeance R, coil spring, tapered alloy steerer, reb adj., 20mm thru-axle, 170mm travel |
| Ammo. Post | FOX VAN R, coil spring, rebound adj., S: 450, M: 500, L: 550 |
| Sterzo | 1-1/8 and 1-1/2″ threadless, Campy style upper with 1-1/2″ lower, cartridge bearings |
| Attacco manubrio | Specialized P.Series MTB, forged alloy, 4-bolt, 40mm length, 31.8mm |
| Manubrio | Specialized DH low-rise bar, 6061 alloy, 750mm wide, 8-degree backsweep, 6-degree upsweep, 31.8mm |
| Manopole | Specialized Sip Grip, half-waffle aramid-infused, S/M: Regular, Others: XL thickness |
| Freni | Custom Avid Elixir 3 SL, hydraulic disc, alloy backed organic pads, HS-1 rotor, 200/180 mm |
| Leve Freni | Avid Elixir 3, hydraulic disc, tool-less reach adj. |
| Cambio posteriore | SRAM X9 Type 2, 10-speed, mid cage |
| Deragliatore Ant. | SRAM X7, 10-speed, S3 direct mount for DMD, bottom pull |
| Comandi | SRAM X7, 10-speed, trigger, w/MatchMaker clamp |
| Cassetta | SRAM PG-1030, 10-speed, 11-36 |
| Catena | KMC X10, nickel plate, reusable Missing Link |
| Guarnitura | Custom SRAM S-1250, 10-speed AM double, PF30 spindle w/ shift guard, S: 170mm, Others: 175mm |
| Ingranaggi | 36/24 |
| Movimento Centrale | SRAM PF30, OS press-in bearing, sealed cartridge |
| Pedali | Resin Test Ride Pedals with toe clips, CEN std. |
| Cerchi | P-Disc, 32mm wide, 36h |
| Mozzo Anteriore | Specialized Hi Lo disc, laser-etched logo, sealed cartridge bearing, 15mm thru-axle, 36h |
| Mozzo Posteriore | Specialized Hi Lo disc, 4x-sealed cartridge bearing, 12mm thru-axle, 36h |
| Raggi | Stainless, 14g |
| Pneumatico Ant. | Specialized Butcher SX, 2Bliss Ready, 60TPI, aramid bead, dual-compound, 26×2.3″ |
| Pneumatico Post. | Specialized Butcher SX, 2Bliss Ready, 60TPI, aramid bead, dual-compound, 26×2.3″ |
| Camere | Ultralight presta |
| Sella | Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm |
| Reggisella | Specialized 2014 butted alloy, single bolt setback, 30.9mm, S/M: 350mm, Others: 400mm |
| Collarino | 34.9mm clamp, 7050 hard anodized alloy collar w/ QR, black |
| Colore | Nero |
| Misure | S, M, L |
Maggiori info su: www.specialized.com